Home > HARDWARE > WINDOW & DOOR HARDWARE > BARN DOOR HARDWARE
Choose a sub category:
BARN DOOR TRACK / BRACKETS BARN DOOR HANGERS BARN DOOR GUIDES
BARN DOOR PULLS / LATCHES
Sort By:
1 2
Stanley 235309 Open Bar Holder Stanley 193839 Round Rail Track End Cap Stanley 351503 Open Bar Holder
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel. With bolt, nut and washer. Pack loose. Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
Stanley 235291 Closed Bar Holder Stanley 351502 Closed Bar Holder Stanley 104331 Single Side Bracket
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel. Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel. Designed as a support bracket for Stanley's 105270, 105676, 105213 and 105726 box rail at 24 in OC intervals. Includes lags. Display packed.
Stanley 100834 Door Bumper Stanley 104380 Splice Bracket Stanley 100875 Adjustable Reversible Stay Roller
Designed for use as a door stop on up to 2 in thick sliding doors. Embossed steel for added strength. Display packed. Designed to join two pieces of Stanley's 105270, 105676, 105213 and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags. Without screws. Each loose.
Stanley DP5421BC Single Round Rail Splice Bracket Stanley 131490 Adjustable Reversible Stay Roller Stanley 160754 Cam Latch
Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lb. Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4 in thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed. Boxed.
Stanley 161760 Cam Latch Stanley 185447 Center Latch Stanley 51EDBC Box Rail End Cap
Designed to hold wood and metal doors firmly in place against the door jamb on farm and utility buildings. It also can be used for end gates on stake trucks. Offers 7 in hook. Designed for right- or left-hand applications. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in thick door frames. Boxed. Designed for bi-parting wood sliding doors at least 1-1/2 in thick. Cam action and adjustable hook holds doors tightly together. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in thick door frames. 15 in long hook. Boxed. Designed to press into rail to keep rail free of foreign materials from birds or weather. Can be used as center stop using 3/8 x 2 in carriage bolts (not furnished). Often packed with box hangers.
Stanley 105676 Rail Track Stanley 174268 Rail Hanger Stanley 112102 Trolley Rail Hanger
Designed for use on doors weighing up to 450 lb. Rail drilled 24 in OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Designed for use on wood-frame, metal-clad doors using a 2 x 4 in or 2 x 6 in frame with Stanley's 105270, 105676, 105213 and 105726 box rail. Includes two washers, 4 hex nuts and two end caps per pair. Made of durable one-piece, precision-formed steel. Offers self-lubricating Delrin bearings. The 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7 in adjusted laterally 1 in by turning offset bolt for desired clearance. Can hold 450 lb per pair. 9 in bolt. Boxed. Rigid with single door strap. Designed for use on wood-frame sliding doors from 1-1/2 in to 2 in thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed.
Stanley 105726 Rail Track Stanley 5414BC Double Round Rail Bracket Stanley 168815 Track Hanger
Designed for use on doors weighing up to 450 lb. Rail drilled 24 in OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels. Designed to be used with #5400 round rail to mount double runs of rail for by-passing doors to side of building installation. Includes lag bolt, (2) carriage bolts and (2) nuts. (1) Bracket should be installed every 2 ft of rail. Suitable for use on corrugated metal siding due to narrow mounting surface. Flexible with single door strap. Designed for use on wood-frame sliding doors from 1-1/2 to 2 in Thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pounds capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed.
Stanley 174284 Rail Hanger Stanley 193714 Round Rail Hanger Stanley 193656 Round Rail Hanger
Designed for use with box rail on wood-frame, metal-clad door using a 2 x 4 in or 2 x 6 in frame. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Packed with four washers, four hex nuts and two end caps per pair. 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7 in adjusts laterally 1 in by turning offset bolt for desired clearance. Durable one-piece, precision formed steel. Each hardened axle has 12 hardened and precision-ground alloy steel roller-bearings. Delrin seals keep out dirt while holding in long-life grease. Safe working load - 300 lb per hanger. 9 in bolt. Designed for use with round rail on wood-frame, metal-clad doors using a 2 x 6 in top lateral. 1/2 in offset 9 in bolt (with 7 in thread) adjusts door vertically and laterally (1 in) from inside building. Flexible trunnion design resists door damage. Precision-ground and hardened steel roller bearings, axles and sleeves provide longer life and easier operation. Interchangeable with other brands of round rail. Safe working load - 300 lb per hanger. Designed for use with round rail on wood-frame, metal-clad doors using a 2 x 6 in top lateral. 1/2 in offset 9 in bolt (with 7 in thread) adjusts door vertically and laterally (1 in) from inside building. Flexible trunnion design resists door damage. Precision-ground and hardened steel roller bearings, axles and sleeves provide longer life and easier operation. Interchangeable with other brands of round rail. Safe working load - 300 lb per hanger.
Stanley 131565 Adjustable Door Guide Stanley 112359 Flexible Door Hanger Stanley 105213 Rail Track
Designed for single sliding or bi-parting metal or wood doors. Intended to take abuse from trucks, tractors and farm machinery when used around factory and farm buildings. Smooth ramp on each side of the guide prevents cutting tractor or truck tires. Mounts on concrete floors with lag screws and shields or on a 6 in x 6 in post. 1/2 in rod or bolt inserted through hole in each side will serve as a center stop for bi-parting doors. Meets ANSI/BHMA, A 156.14. Manufactured from hot-rolled steel. Boxed. Designed for use with box rail on wood-frame or metal clad doors using a 2 x 4 in or 2 x 6 in frame. For use with #59 or #5110 box rail. Packed with two washers, 4 hex nuts and two end caps per pair, seventeen 3/8 x 2-1/2 in lag bolts also are included for mounting rail. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 6 in adjusts laterally 1 in by turning offset bolt for desired clearance. Safe working load - 225 lb per hanger. 9 in bolt. Designed for use on doors weighing up to 450 lb. Rail drilled 24 in OC for brackets. Can be used with many types of single and multiple brackets. Screws included. Meets ANSI/BHMA A 156.14, Grade 1. Rail is formed to give an even tread to hanger wheels.
Stanley 112458 Flexible Door Hanger Trackmaster 5400 Plain Round Barn Door Rail Stanley 112128 Trolley Rail Hanger
Designed for use with box rail on wood-frame sliding doors from 1-1/2 to 2 in Thick. For use with #59 or #5110 box rail. Packed with nine 3/8 x 2 in lag screws for mounting rail and two end caps. Hangers have vertical and lateral adjustments that can be made from outside building. Durable one-piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2 in offset bolt is threaded 5-1/2 in with a lateral adjustment of 1 in by turning bolt. Safe working load - 225 lb. per hanger. Designed for doors weighing up to 600 lb. per panel. Can be used with various types of single and multiple brackets. Advanced rail design with flat top and sides for easier mounting and better stability. Self cleaning and smoother operation. Interchangeable with other brands of round rail. Manufactured from galvanized steel. Rigid with 2-51F and 1-51G brackets with lag. Designed for use on wood-frame sliding doors from 1-1/2 in to 2 in thick. Slot in top of door strap allows lateral and vertical adjustment. 1 pair 5005 box rail hangers, 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings.
   
 
1 2