Home > ELECTRICAL > ROUGH ELECTRICAL > CONDUIT
Choose a sub category:
METAL CONDUIT - EMT PVC CONDUIT METAL CONDUIT - RIGID
PLASTIC FLEXIBLE CONDUIT METAL FLEX CONDUIT
Sort By:
1 2
Allied 101543 EMT Electrical Conduit Carlon 12005-UPC Flexible Raceway J-M 67447 Electrical Conduit
Allied Tube & Conduit EMT Conduit, Trade Size: 1/2 in, 5/8 in Dia Inside, 45/64 in Dia Outside, Steel, Galvanized, 10 ft L Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL listed. Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10 ft lengths with one bell end.
Allied 101550 EMT Electrical Conduit J-M 67454 Electrical Conduit Carlon 12007-UPC Flexible Raceway
High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low-friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3. Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10 ft lengths with one bell end. Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL listed.
J-M 67462 Rigid Conduit J-M 67611 Rigid Conduit Thomas & Betts 150DRB Liquidtight Flexible/Non-Metallic Conduit Kit
JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. Contains everything necessary for complete installation including 6 ft conduit, two straight fittings and one 90 deg fitting. Totally non-metallic system provides assured grounding for safety. Non-conductive, non-corrosive. Easy to install. UL listed components.
Allied 101568 EMT Conduit Southwire 55189401 Liquid Tight Flexible Whip J-M 67603 Rigid Conduit
High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low-friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3. Resistant to rust, cracks and separation. Constructed with two different PVC materials. 600 V stranded copper THHN/THWN conductors and UL listed LFNC-B fittings. 12 in wire leads are left exposed at each end. Green insulated copper grounding conductor. Intended for 208/240/480 V. UL/CSA, complies with NEC Article 356. JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations.
J-M 67470 Rigid Conduit Thomas & Betts 150ERB-UPC Liquidtight Flexible/Non-Metallic Conduit Kit Carlon E945E-CAR Expansion Joint
JM Eagle's SCH 40 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. Carlon Conduit, Flexible, Trade Size: 3/4 in, PVC, 6 ft L Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.
Carlon E945D-CAR Expansion Joint J-M 67488 Rigid Conduit Carlon E945F-CAR Expansion Joint
Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum. JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.
Southwire 55189301 Liquid Tight Flexible Whip J-M 67595 Rigid Conduit J-M 67496 Rigid Conduit
Resistant to rust, cracks and separation. Constructed with two different PVC materials. 600 V stranded copper THHN/THWN conductors and UL listed LFNC-B fittings. 12 in wire leads are left exposed at each end. Green insulated copper grounding conductor. Intended for 208/240/480 V. UL/CSA, complies with NEC Article 356. JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations.
Carlon E945G Expansion Joint Allied 101576 EMT Conduit Allied 103051 Rigid Conduit
Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum. High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low-friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3. Manufactured from mild steel, Allied's Rigid Conduit is highly resistant to damage from impact yet ductile to facilitate bending. The 3/4 in taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black and 1/4 sizes red.
Alflex FO5000025M Type RWA Reduced Wall Flexible Conduit Allied 103069 Rigid Conduit Alflex FO7500025M Type RWA Reduced Wall Flexible Conduit
Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334. Manufactured from mild steel, Allied's Rigid Conduit is highly resistant to damage from impact yet ductile to facilitate bending. The 3/4 in taper NPT threads (ANSI B1.20.1) are full cut and hot galvanized after cutting. Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black and 1/4 sizes red. Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.
Allied 101584 EMT Conduit J-M 67587 Rigid Conduit Ultratite 55094321 Liquid Tight Flexible Conduit
High-grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating and a clear organic polymer top coat to form a triple layer of protection against corrosion and abrasion. Has a low-friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL listed, meets ANSI C80.3. JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations. For the installation and protection of electrical conductors in circuits of 600 V or less. Manufactured with a spiral of rigid PVC reinforcement imbedded within a flexible PVC wall. Impact- and crush-resistant, liquidtight and highly flexible. UV sunlight-resistant jacket. Rated for temperature range of -30 to 80 deg C, 60 deg C Oil (-22 to +176, 140 deg F Oil). UL listed.
   
 
1 2