Home > PLUMBING > ROUGH PLUMBING SUPPLIES > VALVES
Choose a sub category:
GAS VALVES NEEDLE VALVES HOSE BIBBS
BOILER DRAINS STOP VALVES STOP & WASTE VALVES
GLOBE VALVES WATER SUPPLY LINE VALVES BALL VALVES
GATE VALVES CHECK VALVES FOOT VALVES
SILLCOCKS FROSTPROOF SILLCOCKS YARD HYDRANTS
VALVE/SILLCOCK HANDLES VALVE BOXES & COVERS MISC VALVES & FITTINGS
Sort By:
1 2 3 ... 16
World Wide Sourcing PMB-042 Sillcock Handle Danco 80416 Square Broach Valve Wheel Handle Danco 80417 Round Broach Valve Wheel Handle
WORLDWIDE SOURCING Sillcock Wheel Handle, Suitable For Use With: 13/32 in Round 12 Point Stem, Zinc, 1-3/4 in Dia Danco Valve Wheel Handle, Square Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel Danco Valve Wheel Handle, Round Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel
Plumb Pak PP28601 Square Stem Wheel Sillcock Faucet Handle Mueller ProLine In-Line Check Valve Mueller ProLine In-Line Check Valve
Plumb Pak Sillcock Faucet Handle, Square Stem, Wheel, 1-3/4 in Width Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve B and K Industries 888-221RP Bleeder Caps
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Fits most drainable valves. 3 styles of caps with washers included.
Mueller ProLine Quarter Turn Solvent Ball Valve Plumb Pak PP806-11 Sillcock Faucet Handle Plumb Pak PP806-1 Sillcock Faucet Wheel Handle
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Lead-free compliant. 12 point Plumb Pak Sillcock Faucet Wheel Handle, Suitable For Use With: 1/4 in Square Stems
Mueller ProLine Quarter Turn Ball Valve Plumb Pak PP10-8SN Coin Air Valve Plumb Pak PP806-10 Sillcock Faucet Handle
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Valve is operate by a coin or screwdriver. 16 point
Mueller 107-634 Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve Mueller ProLine Quarter Turn Ball Valve
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
KBI HBF-0750-T Washerless Sillcock and Angle Lawn Faucet KBI HBF-0500-T Washerless Sillcock and Angle Lawn Faucet Mueller ProLine Quarter Turn Ball Valve
Bronze color body with red wheel handle. For hot and cold fluid systems up to 180 degrees Fahrenheit and 150 lbs. pressure. Complies with all applicable ASTM and ANSI standards. Bronze color body with red wheel handle. For hot and cold fluid systems up to 180 degrees Fahrenheit and 150 lbs. pressure. Complies with all applicable ASTM and ANSI standards. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.
Mueller 107-604 Quarter Turn Solvent Ball Valve BREAKER VACUUM BRASS 3/4INCH  KBI SWL-0750-T Stop and Waste Valve
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Lead-free compliant. SharkBite Vacuum Breaker, 3/4 in, Female x Male End Connection, Brass Body, 180 Deg F, Use On Homes, Schools, Laboratories or Any Commercial Building Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards.
B&K Proline Solvent Stop Valve Mueller ProLine In-Line Check Valve B&K Proline Solvent Stop Valve
CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
B&K 108-904RP Backflow Preventer Vacuum Breaker Plumb Pak PP806-15 Tee Valve Faucet Handle Mueller ProLine Quarter Turn Ball Valve
Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved. Plumb Pak Tee Valve Faucet Handle, Suitable For Use With: Lawn Faucet or Valves, 12/16 Point For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G.
   
 
1 2 3 ... 16