|
|
|
|
|
|
|
|
|
|
|
Plumb Pak Coin Air Valve, Metal, Satin Nickel, Dimensions: 2.94 in L x 2 in W x 2.06 in H
|
The V-3 Vacuum Breaker prevents dangerous back-siphonage and backflow into a potable water supply. The V-3 is equipped with a protruding tip device for manual draining of a faucet (after hose removal), which prevents freezing. The V-3 is also available in a chrome-plated version (V-3C). These units are not intended for use where water contamination could occur as a result of draining or for permanent continuous pressure installation. For continuous pressure systems, install the BFP Dual Check Valve.
|
1/8 x 27 NPT.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits any 3/4 in hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7, ASSE 1019 approved, UPC, Canadian UPC approved.
|
Zamak construction. Convenient holes to lock handle closed position. For use with all petroleum products, except trichlorethylene. Not for use with detergents or water. 3/4 in male pipe thread inlet. Threaded inlets comply with ANSI B1.20.01.
|
Includes vacuum breaker cap, underbody, O-ring and plunger. Air vent assembly for Arrowhead frost-free hydrants, 420 and 455BFP Series.
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? Quiet Pipes water hammer absorbers are designed to reduce water pipe banging noise caused by quick-closing valves. It protects plumbing appliances and fixtures from the effects of water hammer.
|
Oatey? quiet pipes water hammer absorbers are designed to reduce water pipe banging noise caused by quick-closing valves and protect plumbing appliances and fixtures from the effects of water hammer.
|
B & K ProLine Flowlock Hose End Locking Device, Dimensions: 3/4 in
|
|
|
|
|
|
|
|
|
|
|
|
|
3/4 in mip x 3/8 in flare.
|
arrowhead Self-Draining Vacuum Breaker, 3/4 in Connection, Fine Thread x MHT Connection, 1-1/16 in Inlet, Maximum Working Temperature: 140 deg F, 125 psi Maximum, Brass, Nickel
|
Heavy bronze construction. Quarter turn operation. Lockable handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7.
|
|