Home > HEATING & COOLING > HEAT & AIR CONDITIONING > REGISTERS & DEFLECTORS
Choose a sub category:
DEFLECTORS WALL REGISTERS FLOOR REGISTERS
CEILING / FLOOR DIFFUSERS
Sort By:
1 2 3
GRILL RETURN AIR 12X6IN WHT   GRILL RETURN AIR 4X10IN WHT   REGISTER FLOOR 4X10IN WHT
High-density polystyrene construction. Rustproof and scratch-resistant rounded corners for safety. 3/16 in margin turnback. All-steel construction. Widespread air diffusion. May be used as outlet or inlet. Durable powder-coat painted finish. Mounting holes at each end. High-impact polystyrene construction. Rustproof and scratch-resistant. Three position 100% damper shut-off. Dishwasher safe. Knockout at each end for ceiling installation.
GRILL RETURN AIR 12X6IN WHT   Frost King HD5 Heat Deflector Mintcraft 1RA1004 Return Air Grille
High-density polystyrene construction. Rustproof and scratch-resistant. Rounded corners for safety. During the Winter, the curved air deflector directs warm air down for improved heating. In the Summer point the vents up to direct the air conditioning towards the ceiling for improved cooling. Plus you can easily cover up drafty vents with the Frost King magnetic vent covers. The air return grille is designed for maximum strength to allow for a smooth walking surface. It features floor gravity and a trusteel face. The measurements are 10 in x 4 in and the color is white. The grille includes two screws.
Frost King HD7 Unbreakable Air Deflector REGISTER SIDEWALL 10X4IN WHT  GRILL RETURN AIR 14X8IN WHT
During the Winter, the curved air deflector directs warm air down for improved heating. In the Summer point the vents up to direct the air conditioning towards the ceiling for improved cooling. Plus you can easily cover up drafty vents with the Frost King magnetic vent covers. One-piece all-steel construction. 1/3 in spaced fins set at 20 deg angle, 3/16 in margin turnback. Painted metal grilles have a durable powder-coat finish. High-density polystyrene construction. Rustproof and scratch-resistant rounded corners for safety. 3/16 in margin turnback.
REGISTER SIDEWALL 10X6IN WHT  REGISTER FLOOR 4X10IN WHT     REGISTER FLOOR 2-1/4X10IN WHT
Imperial Return Air Sidewall Grille, Opening Length: 10 in, Opening Width: 6 in, Fins Spacing: 1/3 in, Steel, White, Painted/Powder-Coated Imperial Standard Floor Register, 9-3/4 in W Duct Opening, 3-3/4 in H Duct Opening, Steel, Powder-Coated Paint, White, 5-1/4 in L, 11-1/4 in W, 1-1/8 in H All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Subtract 1/8 to 1/4 in (depending on how square the opening is) and this is the inside dimensions. Painted metal registers have a durable powder-coat finish.
Frost King MC815/3 Magnetic Ventilation Cover REGISTER FLOOR 2-1/4X12IN BRN REGISTER SIDEWALL WHT 12X4IN
Flexible sheet seals metal register vents to help improve heating or cooling efficiency. Can be painted, stenciled or wall papered to match decor. Easily cut to fit vent size. Size: 8"W x 15"L. 3-Pack. Imperial Standard Floor Register, 11-3/4 in W Duct Opening, 2 in H Duct Opening, Steel, Powder-Coated Paint, Brown, 3-1/2 in L, 13-1/4 in W, 1-1/8 in H One-piece all-steel construction. 1/3 in spaced fins set at 20 deg angle, 3/16 in margin turnback. Painted metal grilles have a durable powder-coat finish.
REGISTER FLOOR 2-1/4X10IN BRN REGISTER FLOOR 2-1/4X12IN WHT REGISTER SIDEWALL 14X6IN WHT
Imperial Standard Floor Register, 11-3/4 in W Duct Opening, 2 in H Duct Opening, Steel, Powder-Coated Paint, Brown, 3-1/2 in L, 11-1/4 in W, 1-1/8 in H Imperial Standard Floor Register, 11-3/4 in W Duct Opening, 2 in H Duct Opening, Steel, Powder-Coated Paint, White, 3-1/2 in L, 13-1/4 in W, 1-1/8 in H Imperial Return Air Sidewall Grille, Opening Length: 14 in, Opening Width: 6 in, Fins Spacing: 1/3 in, Steel, White, Painted/Powder-Coated, 14 in L, 6 in W, 1/4 in Thick
REGISTER CEILING WHITE 4X10IN Mintcraft 1RA1006 Return Air Grille Mintcraft 1RA1206 Return Air Grille
All-steel construction. Widespread air diffusion, damper control, rolled fin for strength and safety. Painted metal grill have a durable powder-coat painted finish. Mounting holes at each end, screws included. The air return grille is designed for maximum strength to allow for a smooth walking surface. It features floor gravity and a trusteel face. The measurements are 10 in x 4 in and the color is white. The grille includes two screws. The air return grille is designed for maximum strength to allow for a smooth walking surface. It features floor gravity and a trusteel face. The measurements are 10 in x 4 in and the color is white. The grille includes two screws.
REGISTER POP-UP 4X10IN WHT    ProSource FR01-2X10B Floor Register REGISTER SIDEWALL WHT 12X6IN
High-impact polystyrene construction. Rustproof and scratch-resistant. Use as conventional register when closed. Use as air deflector when open. Knockout at each end for ceiling installation. The perimeter diffuser offers widespread air diffusion and the parallel valves deflect air to wall or into room, The register is strong, made of an all-steel construction and it has individually assembled face bars with extra wide border. One-piece all-steel construction. 1/3 in spaced fins set at 20 deg angle, 3/16 in margin turnback. Painted metal grilles have a durable powder-coat finish.
REGISTER FLOOR 4X12IN WHT     ProSource FR01-2X10W Floor Register REGISTER FLOOR 2-1/4X14IN WHT
Imperial Floor Register, Faceplate Type: Louvered, Duct Opening Width: 12 in, Duct Opening Height: 4 in, Steel, Painted/Powder-Coated, White, 5-1/4 in L, 13-1/4 in W, 1-1/8 in H The perimeter diffuser offers widespread air diffusion and the parallel valves deflect air to wall or into room, The register is strong, made of an all-steel construction and it has individually assembled face bars with extra wide border. Imperial Standard Floor Register, 11-3/4 in W Duct Opening, 2 in H Duct Opening, Steel, Powder-Coated Paint, White, 3-1/2 in L, 15-1/4 in W, 1-1/8 in H
BASEBOARD GRILLE 14X6IN WHT   ProSource FR01-2X12W Floor Register Mintcraft SW02-8X4 2-Way Sidewall Register
One-piece all-steel construction. 1/3 in fins set at 20 deg angle. 7/8 in margin turnback. Painted grilles have a durable powder-coat finish. The perimeter diffuser offers widespread air diffusion and the parallel valves deflect air to wall or into room, The register is strong, made of an all-steel construction and it has individually assembled face bars with extra wide border. The 100 series style registers have been the mainstay of new residential construction for more than 50 years. Controlling air circulation efficiently and quietly. Multi-louver damper with single lever allows easy adjustment of amount and direction of air current. Featuring countersunk holes and screws included for easy installation. The listed measurement refers to duct opening, not product dimension. Three-way air deflection design offer the air to flow optimizations around the spaces. Excellent addiction to upgrade your room to surround fresh air stream.
   
 
1 2 3