|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aquatic plant basket specially designed to keep the dirt contained under the surface of the water and perforated to allow water to reach the root system. Plant and fish friendly. Also helps prevent soil erosion.
|
Ideal for reducing flow of statuary, waterfall, etc. Restricts tubing up to 1/2" I.D. For use in restricting flow on the discharge of a pump.
|
Replacement for No.566101 mechanical pump intake filter and No.566810 fountain starter kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement pad for the FB-PW and sub bio-filters. Includes 1 coarse and 1 fine filter pad.
|
Helps establish, restore and maintain the natural biological and chemical balance of any pond all year long. Creates a cleaner environment promoting faster fish growth. Reduces ammonia nitrogen levels. Dissolves away organic sludge and helps break down dead algae. Seeds and maintains biological filters. Significantly reduces noxious odors caused by dead algae, fish fecal matter and urine. Reduces hydrogen sulfide, which creates strong, offensive odors. Also reduces build up of bird droppings, fish feed and dead leaves. Contains Photosynthetic bacteria, which reduces cloudy water by promoting Flocculation and settling of organic and inorganic particles. Effective over a wide range of pH conditions. Continued biological activity, even in water temperatures under 55 degrees F (12 degrees C).
|
Quick, easy and accurate five in one strip test for nitrate, nitrite, total hardness, total alkalinity and PH. Allows you to easily track 5 critical water quality parameters with one test. Contains 50 strips.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Allows operation of second water feature from one pump. For use with 1/4'' and 1/2'' threaded discharge pumps and all Little Giant fountain nozzles. Discharge connects to 1/2'' NPT pipe and 3/8'' or 1/2'' ID tubing.
|
Black vinyl tubing becomes virtually invisible when installed below the water's surface and is safe for fish and other aquatic life. This premium material also inhibits algae growth inside the tube.
|
Seasonal water treatment. Helps accelerate decomposition of leaves and other organic matter for healthier start in the spring. Continues to provide sustained biological activity, even when the water temperature are under 40 degrees F (4 degrees C). Contains Psychrophilic strains (cold water bacteria). Helps fish maintain healthy immune systems during winter months. Box contain (2) 2 oz. packets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for continuous use in ponds and statuary fountains. Use in clean fresh water, fully submersed. Built-in flow control and bottom intake for low-level water intake. 2 feet maximum lift and discharge adapters for 1/2" or 3/8" I.D. tubing. 45 gallons per hour at 120V, 60Hz. 6' power cord. 1.2"H x 2"L x 1.7"W. U.L. Listed.
|
Telescoping stem extends 8''-12''. Fits pumps with 1/4'' and 1/2'' threaded discharge. Easy to use three-tier spray pattern.
|
Creates Daisy, Tulip, and Waterbell spray patterns. Telescoping stem extends 8"-12". Built-in flow control/Diverter Valve.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for continuous use in ponds and statuary fountains. Use in clean fresh water, fully submersed. Built-in flow control and bottom intake for low-level water intake. 3.5 feet maximum lift and discharge adapters for 1/2" or 3/8" I.D. tubing. 8 watts. 77 gallons per hour at 120V, 60Hz. 6' power cord. 2.3"H x 2.8"L x 1.9"W. U.L. Listed.
|
For all ponds. 1/2'' MNPT valve, 1/2" Barb adapter, 1/2" Female adapter and 3/4" FGHT. Adjustable float.
|
Designed to remove suspended sediment and solids from water when system turns on, can run intermittently. Easy-to-clean filter pads help remove debris from water before it enters the pump to help extend pump life and keep fountain head/water feature from clogging. Includes 2 debris filters with easy-to-connect adapter. Compatible with PE-1F and PE-2F pumps. Corrosion and UV resistant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for continuous use in ponds and statuary fountains. Use in clean fresh water, fully submersed. Built-in flow control and bottom intake for low-level water intake. 5.5 feet maximum lift and discharge adapters for 1/2" or 5/8" I.D. tubing. 130 gallons per hour at 120V, 60Hz. 6' power cord. 11 watts. 3.20"H x 3.5"L x 2.80W. U.L. Listed.
|
Designed to remove suspended sediment and solids from water. Two easy-to-clean filtering pads, one coarse, one fine, help to remove debris from water before it enters the pump to help extend pump life and keep fountain head from clogging. 6" stem with adapter. For ponds up to 300 gallons.
|
Designed for continuous use in ponds and statuary fountains. Use in clean fresh water, fully submersed. Environmentally safe and oil-less. 6 feet maximum lift and 1/2" MNPT discharge. 300 gallons per hour at 120V, 60Hz and 6' power cord. 3.6"H x 3.70"L x 2.7"W. CULUS Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for continuous use in ponds and statuary fountains. Use in clean fresh water, fully submersed. Environmentally safe and oil-less. 7 feet maximum lift and 1/4" MNPT discharge. Pumps 170 gallons per hour at 36 watts, 115V, 60Hz and 15' power cord.
|
7' maximum pumping height. 5/8" or 1/2'' barbed discharge. Built-in adjustable flow control valve. 33 watts. 15' cord. Designed to operate continuously with minimal energy consumption. Corrosion resistant body specifically for submersible use. Easy to install and maintain. Ideal for a variety of applications.
|
Encapsulated epoxy filled pumps, energy efficient, corrosion resistant plastic housing with compact design. Environmentally safe and oil-less. 12.2 feet maximum lift and 1/4" MNPT discharge. 300 gallons per hour at 115v, 60Hz, 47W, 1/40 H.P. and 15' power cord. U.L./CSA listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ceramic shaft for longer life. 8' maximum pumping height. 3/4'' barbed discharge, 57 watts. 15' cord. Designed to operate continuously with minimal energy consumption. Corrosion-resistant body specifically for submersible use. Easy to install and maintain. Ideal for a variety of applications. 4'H x 5.3"L x 4.3"W.
|
Encapsulated epoxy filled pumps, energy efficient, corrosion resistant plastic housing with compact design. Environmentally safe and oil-less. 13 feet maximum lift and 1/2" MNPT discharge. 475 gallons per hour at 115v, 60Hz, 80W, 1/28 H.P. and 15' power cord. U.L./CSA listed.
|
Designed to operate continuously with minimal energy consumption. Corrosion-resistant body specifically for submersible use. Easy to install and maintain. Ideal for a variety of applications. 1'' barbed discharge. 11.75' maximum pumping height. Ceramic shaft for longer life. 160 watts. 15' cord. 4.4"H x 5.7"L x 4.3"W.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gives you the flexibility of installing a pond where electricity is far from the pond site. Lets you control the operation of your pumps, UV clarifiers, underwater lights and other necessary items. Adjustable on/off timer. Digital timers control both line voltage and low voltage. Fuse protected. 10 amp max on 115 volt side and 150 watt max on 12 volt side. 15' cord.
|
These pumps utilize a permanent-split capacitor (PSC) motor sealed in stainless steel housing surrounded by a plastic case. PSC motor uses less energy than other pumps of similar flow capacity. The motor develops less heat, so does not require internal oil. Use for ponds up to 1200 gallons. Pumps 1900 gallons per hour at 115v, 60Hz, 230W, 1/8 H.P. 20' maximum lift and 1-1/4" FNPT discharge. Includes 1-1/4" MNPT x 1" barbed elbow and 16' power cord. U.L./C-CSA listed.
|
Designed with multi-purpose flexibility right into the pump while their wet rotor technology makes them energy efficient. They can be used submersed or externally and can be mounted vertically or horizontally. With MNPT threads and fittings built-in, attaching fittings is a breeze. The included pre-filter makes these pumps built for flexibility and durability in any decorative water application. Constructed without mechanical seal or oil. Accepts threaded fittings (Not Included) and accepts rubber coupling (Not Included). Modular screen ability. Rope or cable loop for deep installation. Mounting holes in all four feet. Easy carry handle. Specifications: 1200 GPH at 0'; 157 watts; 115 volts; 60 HZ; 1.5" MNPT and SPIG discharge and inlet. 20' cord.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Energy efficient. Ideal for large pond pumping jobs. Uses from 40 to 60 percent less energy than direct drive pumps. No seal, no oil. Versatile construction can be installed inline. 1-1/2'' input and output. FNPT discharge and MNPT intake. UL listed with a 14-1/2' max. head. 20' power cord.
|
Designed to operate continuously. Produces greater starting torque and more flow pressure. Ideal for use in filtration, waterfalls and streams, as well as operating two water features (statuary ornament and fountain nozzle) simultaneously. Use vertically or horizontally. 29' maximum pumping height. 1-1/4'' FNPT discharge. 1-1/4'' barbed adapter discharge. 700 watts. 16' cord.
|
Designed with multi-purpose flexibility right into the pump while their wet rotor technology makes them energy efficient. They can be used submersed or externally and can be mounted vertically or horizontally. With MNPT threads and fittings built-in, attaching fittings is a breeze. The included pre-filter makes these pumps built for flexibility and durability in any decorative water application. Constructed without mechanical seal or oil. Accepts threaded fittings (Not Included) and accepts rubber coupling (Not Included). Modular screen ability. Rope or cable loop for deep installation. Mounting holes in all four feet. Easy carry handle. Specifications: 2700 GPH at 0'; 147 watts; 115 volts; 60 HZ; 1.5" MNPT and SPIG discharge and inlet. 20' cord.
|
|
|
