Home > AUTOMOTIVE > GENERAL AUTOMOTIVE > POWER TOOLS & ACC > POWER TOOLS > BENCH & STATIONARY > POWER MITRE BOXES
Sort By:
1
MITERSAW COMPOUND 10IN W/LASER Hitachi C10FCH2 Sliding Compound Corded Miter Saw with Laser Marker Dewalt DW713 Single Bevel Compound Corded Miter Saw
Make precision miter cuts up to 45 deg left and right with 9 stops at commonly used angles. Make bevel cuts up to 45 deg left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in secs. Spindle lock for quick blade changes. Includes 60 teeth carbide-tipped blade installed, hold-down clamp, dust bag, two extension wings, blade wrench and two AAA batteries for laser. No-load speed of 4600 rpm and weighs 24 lb. This 10 in compound miter saw offers the ultimate in form and function. With its aggressive design, there is no doubt that this saw is designed for the professional. The C10FCH2S features a powerful 15 A motor, vibration reducing horizontal handle and Metabo HPT's laser marker system. The DW713 10 in compound miter saw has a 15 A motor delivering 5000 rpm, extended power and durability. Features stainless steel miter detent plate and cam miter lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 4-1/2 in of crown molding verticaly nested. Lightweight design and built-in carry handle for portability.
MITERSAW SLIDING COMPOUND 10IN Dewalt DW715 Single Bevel Compound Corded Miter Saw Makita LS1040 Double Bevel Compound Corded Miter Saw
Sliding rail system for crosscutting stock up to 12 in wide. Make precision miter cut up to 45 deg left and right. Make bevel cuts up to 45 deg left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment and improved accuracy. Die-cast aluminum base for portability. Electric brake stops the blade in secs. Spindle lock for quick blade changes. Includes 60 teeth carbide-tipped blade, hold-down clamp, dust bag, two extension wings, rear support foot bar,  & a blade wrench. Speed of 4800 rpm and weighs 40 lb. The 12 in single-bevel compound miter saw is powered by a 15 A motor to drive 4000 rpm, delivering extended power and durability. It features a stainless-steel miter detent plate and cam miter lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 5-1/2 in of base moulding vertically and 5-1/2 in of crown moulding vertically nested. It's lightweight design and built-in carry handle are ideal for portability. The LS1040 has a dynamically balanced 15 A direct drive motor with 4600 rpm for improved performance. The direct drive motor with soft start delivers smoother start-ups and constant power, with no belts to slip or replace. The LS1040 has a dual post compound pivot arm, with bevel cuts up to 45 deg to the left. Miter adjustments range from 0 to 45 deg (left) and 0 to 52 deg (right), with nine positive miter stops at 15, 22.5, 30 and 45 deg (left or right) and 0 deg (90 deg cuts). The precision-machined aluminum base ensures accurate cuts. Ease-of-use and comfort features include a fluorescent light that works independently of the blade rotation to clearly illuminate the work surface and a compact size weighs only 27.3 lb for easy portability.
Dewalt DW716 Double Bevel Compound Corded Miter Saw Hitachi C10FSBP4 Double Bevel Sliding Compound Corded Miter Saw SAW MITER W/BATT W/CHARGER 20V
The DW716 12 in double-bevel compound miter saw has a 15 A motor for extended power and durability. Features stainless steel miter detent plate and cam miter lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 6-5/8 in of nested crown and 6-1/2 in of base molding verticaly. Lightweight design, head lock-down pin and built-in carry handle for portability. Metabo HPT Compound Miter Saw, Electric Power Source, Maximum Miter Angle: 57 deg, Maximum Bevel Angle: 45 deg, 3800 rpm Speed, 10 in Diameter Blade, Dimensions: 35.1 in L x 17.4 in W x 20.1 in H, Includes: 940543 10 mm Box Wrench, 998845 Dust Bag, 321385 Pivoting Flip Fence, 310878 10 in 40T TCT Saw Blade The DCS361M1 20 V MAX 7-1/4 in sliding miter saw comes with a battery and charger which provides on average 183 cuts of 2 x 4 pine or 275 cuts of 3-1/4 pine baseboard. Adjustable stainless steel miter detent plate with 11-positive stops improves productivity and ensures cutting accuracy.
Hitachi C10FSHPS Double Bevel Sliding Compound Corded Miter Saw Dewalt DWS780 Double Bevel Sliding Compound Corded Miter Saw Makita LS1018 Dual Slide Compound Miter Saw
HiKOKI Miter Saw, 1450 W Supply, Maximum Miter Angle: 57 deg, Maximum Bevel Angle: 45 deg, 3800 rpm Speed, 10 in Diameter Blade, Electronic Control Adjustable stainless steel miter detent plate with 10-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. Single lever action double bevel design allows saw to easily bevel left and right 0-48 degree with positive stops at 0, 22.5, 33.9 and 45 degree in both directions permitting user to flip the saw and not the material. Back fence design delivers ability to cut 2 x 16" dimensional lumber at 90 degrees and 2 x 12" at 45 degrees. Precise miter system and machined base fence support deliver increased cutting accuracy. Innovative gearbox and belt-drive design for increased vertical cutting capacity. Miters 60 degrees to the left and 50 degrees to the right. Dual horizontal steel rails with clamping mechanism and linear ball bearings. Camlock miter handle with detent override. Compact and lightweight design for quick, easy transport and storage. For use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path.  STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15 amps, 3,800 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 16" horizontal capacity baseboard lying flat, 11-1/4" horizontal capacity crown molding lying flat,  2 x 14" (2 x 16" with back fence) 45-degree bevel cut capacity (dimensional lumber),  2 x 14" (2 x 16" with back fence) for 90-degree cross-cut capacity (dimensional lumber),  16" for 90-degree cross-cut capacity (max width), 2 x 12" max width for 45-degree miter-cut capacity (max height), 2 x 12" for 45-degree miter-cut capacity (max width). 53 lbs. tool weight. Stand Not Included. Large cutting capacity in a compact design and less weight at only 43.7 lb for jobsite portability. Powerful 13 A direct drive motor requires less maintenance and delivers 4300 rpm. Cuts up to 12 in at 90 deg and 8-1/2 in at 45 deg. Linear ball bearing system engineered to deliver accurate cuts. Rear handle bevel lock is easily accessible and adjusts 0 to 45 deg (left and right) with positive stops at 0 deg, 45 deg (left and right). Soft start feature for smooth start-ups. Ergonomic rubberized D-handle design for better fit and added comfort. Large precision machined aluminum base supports material for more efficient cutting. Electric brake for maximum productivity. See-thru blade guard system for greater visibility of blade and line of cut. Oversized trigger switch for better fit, added comfort and easier operation. Includes extension wings for supporting long work pieces. Ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders, general contractors and more. Includes one 10 in 40T Miter saw blade, one triangle rule for miter saws, one vice assembly, one dust bag assembly, one extension wing and one wrench 13 mm.
Milwaukee 6955-20 Double Bevel Sliding Compound Corded Miter Saw
The 6955-20 12 in dual-bevel sliding compound miter saw offers finest in class accuracy, power and ease of use. The Miter angle digital readout provides repeatable accuracy to 0.1 deg. The miter angle fine adjust with detent override makes it simple to dial-in precise miter angles. Dual integral jobsite lights fully illuminate the work piece and cut line from either side of the blade. The powerful 15 A, 3.3 maximum hp direct drive motor provides increased power for high performance cutting in hard lumber. Constant power technology with soft start maintains constant cutting speed under load and decreases start up head movement. The integral dust channel captures up to 75% of the dust and debris cut.
   
 
1