Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS > POST ANCHORS / CAPS
Sort By:
1
POST BASE SIDE PLATE GALV 4X4I POST BASE SIDE PLATE GALV 6X6I POST BASE STANDOFF BLACK 4X4IN
The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The Avant Collection features straighter edges for a clean, timeless design. These decorative side plates attach to the bottom of a post or column to provide a finished look to an installed post-base. They are ideal for projects such as pergolas, patio covers and other top-supported structures. The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The Avant Collection features straighter edges for a clean, timeless design. These decorative side plates attach to the bottom of a post or column to provide a finished look to an installed post-base. They are ideal for projects such as pergolas, patio covers and other top-supported structures. The CPS is a composite plastic standoff base designed for use both indoors and outdoors. The CPS attaches to the bottom of the solid wood column and to concrete with threaded rod and epoxy. The CPS is load rated and features either a square or a rectangle shape depending upon post dimensions.
POST CAP PLASTIC BLACK 4 X 4IN POST BASE RETROFIT ZMAX 12GA  POST CAP PLASTIC BLACK 6 X 6IN
The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The APDPC decorative post cap is an Outdoor Accents? accessory that provides moisture protection and a decorative appearance to wooden post tops. The black textured composite material has UV protection. Available in sizes for nominal 4 x 4 and 6 x 6 wood posts. The RPBZ retrofit post-base is designed to reinforce existing posts and columns. The single, versatile model will fit on any size post consisting of a double 2 x 4 or larger. RPBZ can also be used to reinforce new post-base connections such as braced carports, patio covers, decks and other structures. The RPBZ can be installed with the CPS composite plastic stand-off to meet a 1 in post stand-off code requirement. A single RPBZ can be installed on a post that is flush to a corner and two RPBZs can be installed at away from edge conditions to fortify the post-base connection to resist both wind and seismic forces. Strong-Drive? SDS heavy-duty connector screws install easily and provide excellent holding strength for post to flange connections. Additionally, the RPBZ can be purposed as a temporary base fixture for posts when shoring beams. RPBZ comes standard in ZMAX? finish to meet exposure conditions in many environments. The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The APDPC decorative post cap is an Outdoor Accents? accessory that provides moisture protection and a decorative appearance to wooden post tops. The black textured composite material has UV protection. Available in sizes for nominal 4 x 4 and 6 x 6 wood posts.
E-Z POST BASE SPIKE 12GA 4X4IN POST BASE HALF ZMAX 18GA 6X6IN POST BASE ZMAX 12GA 4 X 4IN
The E-Z Spike is part of a Simpson Strong-Tie? line of products designed to help make reinforcing fence posts simple and economical. The E-Z product line offers solutions for a variety of fence post projects. This post-base allows for easy installation of 4 x 4 wood posts without digging holes or pouring concrete. The BC post-base is designed to connect a post to a wood supporting member. The 18 ga material of this post-base makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber. The PB post-base provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Available with standard or ZMAX? galvanization, which offers extra corrosion resistance for outdoor or treated-wood applications.
PST BASE ADJ W/WU ZMAX 4 X 4IN POST BASE ADJ ZMAX 14GA 4X6IN POST BASE ADJ ZMAX BLACK 4X4IN
The AB Series of retrofit adjustable post-bases provide a 1 in stand-off for the post, are slotted for adjustability and can be installed with nails, Strong-Drive? SD connector screws or bolts (ABU). Depending on the application needs, these adjustable stand-off post-bases are designed for versatility, cost-effectiveness and maximum uplift performance. The ABA is designed to attach wooden posts to existing concrete. The built-in 1 in stand-off of this adjustable post-base helps to prevent rot at the end of the post. The ABA has a slotted anchor hole in the base for adjustability and attaches to the post with nails or Strong-Drive? SD Connector screws. This versatile post-base makes a cost-effective option for securing a post to the foundation. This post-base is available in model sizes for double 2X, 4 x 4, 4 x 6 and 6 x 6 lumber, both nominal and rough. The new double 2X size can be used for installing a structural post consisting of two 2 x 4 studs nailed together as well as for securing double 2X beams to a footing for ground-level decks. Outdoor Accents? adjustable post-bases secure the post or column to concrete and are ideal for outdoor projects, such as pergolas, patio covers and other top-supported structures. These post-bases are part of our Outdoor Accents? Avant Collection? and feature a clean, timeless design that complements nearly every architectural style. ZMAX? galvanized steel with a black powder-coat finish provides corrosion resistance. The APVB post-bases install with the Outdoor Accents? structural wood screw and patented hex head washer (sold separately) the only approved fastener solution for Outdoor Accents? connectors. This screw and washer combination provides a decorative bolt-like connection, but with the installation ease of a screw. APVB models include a 1 in stand-off from the concrete to help avoid post-end rot from moisture.
POST CAP LT ADJ ZMAX 18GA 4X4 POST BASE ADJ ZMAX 14GA 6X6IN POST BASE ZMAX 12GA 6 X 6IN
The LPCZ is designed for a variety of connections between a 4X or 6X beam and a post. This versatile, light post cap has an adjustable design that allows for connection versatility in both new and retrofit applications where structural support is needed. The LPCZ has a ZMAX? coating, a thicker galvanized finish that helps to extend the service life of the connector. The ABA is designed to attach wooden posts to existing concrete. The built-in 1 in stand-off of this adjustable post-base helps to prevent rot at the end of the post. The ABA has a slotted anchor hole in the base for adjustability and attaches to the post with nails or Strong-Drive? SD Connector screws. This versatile post-base makes a cost-effective option for securing a post to the foundation. This post-base is available in model sizes for double 2X, 4 x 4, 4 x 6 and 6 x 6 lumber, both nominal and rough. The new double 2X size can be used for installing a structural post consisting of two 2 x 4 studs nailed together as well as for securing double 2X beams to a footing for ground-level decks. The PB post-base provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Available with standard or ZMAX? galvanization, which offers extra corrosion resistance for outdoor or treated-wood applications.
POST BASE ADJ ZMAX BLACK 4X4IN POST BASE STANDOFF BLACK 6X6IN POST BASE ADJ ZMAX 16GA 4X4IN
Outdoor Accents? adjustable post-bases secure the post or column to concrete and are ideal for outdoor projects such as pergolas, patio covers and other top-supported structures. These post-bases are part of our Outdoor Accents? Mission Collection? and feature decorative edges with a southwestern flair that bring design elegance to your outdoor living areas. ZMAX? galvanized steel with a black powder-coat finish provides corrosion resistance. The APB post-bases install with the Outdoor Accents? structural wood screw and patented hex head washer (sold separately) the only approved fastener solution for Outdoor Accents? connectors. This screw and washer combination provides a decorative bolt-like connection, with the installation ease of a screw. APB models include a 1 in stand-off from the concrete to help avoid post-end rot caused by moisture. The CPS is a composite plastic stand-off base designed for use both indoors and outdoors. The CPS attaches to the bottom of the solid wood column and to concrete with threaded rod and epoxy. The CPS is load-rated and features either a square or a rectangle shape depending upon post dimensions. The ABA is designed to attach wooden posts to existing concrete. The built-in 1 in stand-off of this adjustable post-base helps to prevent rot at the end of the post. The ABA has a slotted anchor hole in the base for adjustability and attaches to the post with nails or Strong-Drive? SD Connector screws. This versatile post-base makes a cost-effective option for securing a post to the foundation. This post-base is available in model sizes for double 2X, 4 x 4, 4 x 6 and 6 x 6 lumber, both nominal and rough. The new double 2X size can be used for installing a structural post consisting of two 2 x 4 studs nailed together as well as for securing double 2X beams to a footing for ground-level decks.
POST CAP RGH ZMAX 18GA 4 X 4IN E-Z POST BASE BLK 12GA 4 X 4IN COLUMN BASE GALV 7GA 6 X 6IN
The BC post cap is designed to connect a beam to a post. The 18 ga material of this post cap makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber. The E-Z Base is part of a Simpson Strong-Tie? line of products designed to help make reinforcing fence posts simple and economical. The E-Z product line offers solutions for a variety of fence post projects. This retrofit post-base allows easy installation of 4 x 4 wood posts on existing concrete. The CB is designed to connect posts to concrete foundations for a wide range of lumber, glulam and engineered-wood product sizes. This column base is either cast-in-place or wet set into the concrete where the bottom of the base plate sits flush with the concrete for full post bearing. The CB is ideal for columns that require high structural values and rugged performance.
POST BASE ADJ ZMAX BLACK 6X6IN POST BASE CONCEALED ZMAX 4X4IN POST BASE CONCEALED ZMAX 6X6IN
Outdoor Accents? adjustable post-bases secure the post or column to concrete and are ideal for outdoor projects, such as pergolas, patio covers and other top-supported structures. These post-bases are part of our Outdoor Accents? Avant Collection? and feature a clean, timeless design that complements nearly every architectural style. ZMAX? galvanized steel with a black powder-coat finish provides corrosion resistance. The APVB post-bases install with the Outdoor Accents? structural wood screw and patented hex head washer (sold separately) the only approved fastener solution for Outdoor Accents? connectors. This screw and washer combination provides a decorative bolt-like connection, but with the installation ease of a screw. APVB models include a 1 in stand-off from the concrete to help avoid post-end rot from moisture. The CPTZ concealed post-base provides a clean, concealed look while providing a 1 in stand-off height above concrete. The 1 in stand-off reduces the potential for decay at the post-end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. It is part of a system of concealed connectors that includes the CBTZ and CJT. The CPTZ concealed post-base provides a clean, concealed look while providing a 1 in stand-off height above concrete. The 1 in stand-off reduces the potential for decay at the post-end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. It is part of a system of concealed connectors that includes the CBTZ and CJT.
POST BASE ADJ ZMAX BLACK 6X6IN POST BASE HALF ZMAX 18GA 4X4IN RH Tamlyn AA46 Post Base
Outdoor Accents? adjustable post-bases secure the post or column to concrete and are ideal for outdoor projects such as pergolas, patio covers and other top-supported structures. These post-bases are part of our Outdoor Accents? Mission Collection? and feature decorative edges with a southwestern flair that bring design elegance to your outdoor living areas. ZMAX? galvanized steel with a black powder-coat finish provides corrosion resistance. The APB post-bases install with the Outdoor Accents? structural wood screw and patented hex head washer (sold separately) the only approved fastener solution for Outdoor Accents? connectors. This screw and washer combination provides a decorative bolt-like connection, with the installation ease of a screw. APB models include a 1 in stand-off from the concrete to help avoid post-end rot caused by moisture. The BC post-base is designed to connect a post to a wood supporting member. The 18 ga material of this post-base makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber. Used for anchoring porch and carpet posts to the slab. Secured base to scab with a 1/2 in anchor bolt and to post with screws or nails. Post pad elevates the post and provides drainage. 18 ga.
PST BASE ADJ W/WU ZMAX 6 X 6IN COLUMN BASE HDG 7GA 6 X 6IN
The AB Series of retrofit adjustable post-bases provide a 1 in stand-off for the post, are slotted for adjustability and can be installed with nails, Strong-Drive? SD connector screws or bolts (ABU). Depending on the application needs, these adjustable stand-off post-bases are designed for versatility, cost-effectiveness and maximum uplift performance. The CB is designed to connect posts to concrete foundations for a wide range of lumber, glulam and engineered-wood product sizes. This column base is either cast-in-place or wet set into the concrete where the bottom of the base plate sits flush with the concrete for full post bearing. The CB is ideal for columns that require high structural values and rugged performance.
   
 
1