|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement leads for Gardner Bender meters GMT-12A, GMT-18A. UL recognized. Tough ABS plastic. Flexible cords for easy use.
|
Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim, cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL listed.
|
The locknut wrench has been designed to end frustration. This ideal tool for locknut operation fits the majority of UL locknuts and features a thin profile that makes those normally tight spaces a thing of the past. It can be used to loosen or tighten a locknut by rotating the wrench in the direction of the arrows marked on both ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Design makes fast, clean cuts. Cuts flexible, water-tight flexible and PVC conduit 1/2 in to 1 in. Reversible cutting blade, lightweight nylon handles, compact 8 in tool fits neatly in pocket or tool pouch.
|
Medium-duty side-cutting pliers used to cut solid or stranded copper and aluminum wire.
|
Tempered carbon steel blade and screwdriver.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GB Wrench Set, Locknut, Steel, Number of Pieces: 3, Includes: 1/2 in , 3/4 in and 1 in Wrenches
|
GB Electrician's Screw Kit, Thread Size: #8-32, Head Type: Round, Drive Type: Phillips, Package Quantity: 5 lb, Silver, Includes: (20) 2/3 in, (20) 7/8 in, (20) 1 in, (20) 1-1/4 in, (20) 1-5/8 in, (20) 2 in Phillips Head Screws
|
GB Electrician's Screw Kit, Thread Size: #8-32, Head Type: Round, Drive Type: Slotted, Package Quantity: 6.56 lb, Silver, Includes: (40) 1/2 in, (20) 3/4 in, (20) 1 in, (20) 1-1/4 in, (20) 1-1/2 in, (15) 2 in Wallplates Screws
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ergonomic high leverage grips for maximum torque, molded and insulated shaft rated to 1000 V for protection when working with electricity. Hardened chrome vanadium steel, with magnetic tips. Two-piece set includes SCE-3252 #2 Phillips tip and SCE-3256 3/16 in slotted tip. Carded packing.
|
Gardner Bender Ugly's Electrical References Revised 2017 Edition is a helpful guide for the professional electrician and electrical minded weekend warrior. The book includes common mathematical formulas and specific rules and regulations from the National Electric Code. The easy to understand format makes it an ideal resource for double checking commonly used equations. Keep on hand as a quick reference for on the job applications.
|
For telecom and electrical applications. Strong, tough tempered steel with nickel-plated finish. Upper blade has notches for stripping 19 AWG and 23 AWG wire. Scraper and file on outside of both blades. Serrated lower blade reduces slippage. 5-1/4 in length, 0.20 lb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat shrink electrical tubing and terminals in splicing wire connections with the Gardner Bender pocket butane torch. This torch comes with a can of butane fuel for convenient refilling.
|
This wire-tracer is a must-have tester for audio/video installer and data com technicians. This multi-purpose wire tracer is able to identify a variety of wires including Cat V, coax, speaker, phone and any non-energized wires. Each unit comes with a transmitter and a receiver. Under ideal conditions, the receiver will function up to 12 in from the wire being traced.
|
The IR thermometers allow for critical temperature measurements to be taken without having to touch an energized circuit. The D:S ratio or (Distance to Spot Ratio), is a rating used to state the distance, in feet, that the test unit should be from the target in order to measure a one foot diameter section. In other words, a 12:1 D:S Ratio means that from 12 ft away, the test unit is measuring a one foot diameter section of the target.
|
|
|
