|
|
|
|
|
|
|
|
|
|
|
Used to secure the position of rebar during concrete pouring.
|
Safely and easily twists wire bar ties. Hardwood handle, ergonomic design.
|
Safely and easily twists wire bar ties. Plastic handle. Rugged design.
|
|
|
|
|
|
|
|
|
|
|
|
|
Stanley Hardware 316489 Weldable Rebar, Replacement, Nominal Size: 4 in, Plain Steel, 36 in L, 1/2 in Dia
|
Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed.
|
Nozzle kit for Ultrabond epoxy 22 oz system. Hi-Flow nozzles reduce waste while increasing flow. 15 in length snaps off to 10 in if required. 3/8 in Dia at tip. Built-in mixing nut allows for fast and easy attachment to cartridge.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed.
|
Stanley Hardware 316497 Weldable Rebar, Replacement, Nominal Size: 4 in, Plain Steel, 72 in L, 1/2 in Dia
|
Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
ULTRABOND? 1 is a two-component, 1:1 mix ratio, structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be used in temperatures from 40 to 110 deg F (4 to 43 deg C). ULTRABOND 1 in cartridges has been tested in accordance with ASTM E488 and ASTM E1512 for its capability to resist static, dynamic, seismic and wind loads in uncracked concrete for both threaded rod and rebar.
|
MIRACLE BOND? repair epoxy is a multi-purpose, rapid cure, bonding and repair adhesive. Its specially formulated, non-sag property is ideal for bonding most materials and ideal for both overhead and vertical repairs, while still being easily dispensed from most dispensing guns. It has an application temperature range between 40 deg F (4 deg C) and 110 deg F (43 deg C).
|
ULTRABOND? 1300 is a two-component structural epoxy system that offers exceptional strength in anchoring and doweling applications in uncracked concrete using threaded rod and rebar. It may be used in temperatures between 40 to 110 deg F (4 to 43 deg C) and this specially formulated non-abrasive epoxy system works extremely well in bulk dispensing pumps.
|
|
|
|
|
|
|
|
|
|
|
|
|
ULTRABOND? 1 is a two-component, 1:1 mix ratio, structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be used in temperatures from 40 to 110 deg F (4 to 43 deg C). ULTRABOND 1 in cartridges has been tested in accordance with ASTM E488 and ASTM E1512 for its capability to resist static, dynamic, seismic and wind loads in uncracked concrete for both threaded rod and rebar.
|
Extend-O-Posts are ideal for temporarily reinforcing existing floors under heavy load areas, but are not recommended for permanent supports in new construction. There's nothing easier to use for supporting sagging floors, weak beams and warping stairways. With Extend-O-Posts the possibilities are unlimited.
|
Made of lightweight durable plastic to give many years of trouble-free use. Fits any standard size belt.
|
|
|
|
|
|
|
|
|
|
|
|
|
Acorn International Rod Chair Rebate, Rebar Size: 3 x 5/8 in, Number of Rebars Held: 3, Metal
|
Extend-O-Posts are ideal for temporarily reinforcing existing floors under heavy load areas, but are not recommended for permanent supports in new construction. There's nothing easier to use for supporting sagging floors, weak beams and warping stairways. With Extend-O-Posts the possibilities are unlimited.
|
Cast aluminum construction. Designed for left or right hand use. Large knob provides smooth operation. Accommodates all types of tie wire rolls.
|
|
|
|
|
|
|
|
|
|
|
|
|
Features an in-line rod system, combined with a specifically designed friction plate that results in exceptional force making dispensing faster and reducing worker exertion and fatigue. Double gripping plates and steel trigger for increased durability and performance. For 22 oz cartridges, but comes with adaptable parts which allow for 16 oz cartridges as well.
|
Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides and more.
|
Support rebar in concrete slabs and foundations. Designed to fit both 3/8 and 1/2 in rebar. Flat base design adds to stability of reinforcing while pouring concrete. Bag of 500.
|
|
|
|
|
|
|
|
|
|
|
|
|
Extend-O-Posts are ideal for temporarily reinforcing existing floors under heavy load areas, but are not recommended for permanent supports in new construction. There's nothing easier to use for supporting sagging floors, weak beams and warping stairways. With Extend-O-Posts the possibilities are unlimited.
|
Acorn International Bar Tie, Wire Size: 17 ga, 4 in L, Includes: (5000) Bar Ties
|
Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to secure the position of rebar during concrete pouring.
|
Reinforced bar, commonly used in concrete and masonry structures.
|
Extend-O-Posts are ideal for temporarily reinforcing existing floors under heavy load areas, but are not recommended for permanent supports in new construction. There's nothing easier to use for supporting sagging floors, weak beams and warping stairways. With Extend-O-Posts the possibilities are unlimited.
|
|
|
|
|
|
|
|
|
|
|
|
|
Extend-O-Posts are ideal for temporarily reinforcing existing floors under heavy load areas, but are not recommended for permanent supports in new construction. There's nothing easier to use for supporting sagging floors, weak beams and warping stairways. With Extend-O-Posts the possibilities are unlimited.
|
Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides and more.
|
Used to secure the position of rebar during concrete pouring.
|
|