|
|
|
|
|
|
|
|
|
|
|
|
|
|
This riser is made of durable polyethylene and conveniently molded so it can be easily cut to the desired length during installation.
|
Made of durable high-impact plastic to ensure long life, these fittings have sharp spiral barbs that eliminate the need for glue and clamps. Quickly and simply insert the fittings by hand into 1/2 in riser flex pipe and you are done.
|
This riser is an extension to the cut-off riser and is made of flexible plastic composition that allows constant bending without breaking. It can be cut to the desired length and is not for use under continuous pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Riser flex fittings come in many sizes and varieties to add versatility to your sprinkler system. The fittings are durable as the flexible plastic is less likely to break on impact and the spiral barbs fasten to the riser flex pipe eliminating the need for glue and clamps.
|
Made of durable high-impact plastic to ensure long life, these fittings have sharp spiral barbs that eliminate the need for glue and clamps. Quickly and simply insert the fittings by hand into 1/2 in riser flex pipe and you are done.
|
Made of durable high-impact plastic to ensure long life, these fittings have sharp spiral barbs that eliminate the need for glue and clamps. Quickly and simply insert the fittings by hand into 1/2 in riser flex pipe and you are done.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of durable high-impact plastic to ensure long life, these fittings have sharp spiral barbs that eliminate the need for glue and clamps. Quickly and simply insert the fittings by hand into 1/2 in riser flex pipe, and you are done.
|
This riser is made of durable polyethylene and conveniently molded so it can be easily cut to the desired length during installation.
|
This riser is made of molded plastic. It can be cut to the desired length and is not for use under continuous pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EZ male pipe thread and spiral barbed adapter allow for easy inline connection of EZ pipe to PVC pipe or sprinkler head. Can also be used for extension of two or more lengths of EZP tubing.
|
This shrub head has a durable plastic insert nozzle and a 1/2 in. FNPT inlet. The plastic nozzle is designed with a 15 ft full spray pattern. This shrub head is also designed with a filter that prevents debris from clogging it.
|
This riser is made of flexible plastic composition that allows constant bending without breaking. It can be cut to the desired length and is not for use under continuous pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This shrub head has a durable plastic insert nozzle and a 1/2 in. FNPT inlet. The plastic nozzle is designed with a 15ft full spray pattern. This shrub head is also designed with a filter that prevents debris from clogging it.
|
The plastic shrub head has a half-circle pattern nozzle with a flow-adjustment screw to adjust spray distance and water flow.
|
Rain Bird Swing Pipe, Specifications: 110 deg F, Dimensions: 2 ft L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The mushroom bubbler is ideal for watering small areas of flowers, shrubs and trees. The water flow adjusts from a light trickle to full flow. It contains a filter for preventing debris from clogging the nozzle and it's made of durable plastic with a 1/2 in female-threaded inlet.
|
Preassembled riser and stake for use with Rain Bird 10 - 32 threaded emission devices.
|
RAINBIRD? 1300 Series flower bubblers provide a controlled, gentle umbrella of water for irrigating trees, flowers and shrub areas. Mount these bubblers on 1/2 in male risers to effectively water areas from 1 to 3 ft.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LASCO Riser Extender, Nominal Size: 1/2 in, FIP x MIP Connection, Schedule Rating: SCH 40, PVC, 1-11/16 in L
|
Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.
|
The Rain Bird EC50 1/2 in end closure is used to close a drip line system without the need of cutting the tubing which can later on be used to extend your irrigation system. Used with 1/2 in tubing or 1/2 in emitter tubing to allow for easy flushing and draining of the system.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Spring-loaded pop-up economy head with plastic nozzle for medium size yards. Space 10 to 15 ft apart. Wiper seal keeps out sand and grit. Stainless steel retraction spring. 1/2 ft MNPT connection.
|
Spring-loaded pop-up economy head with plastic nozzle for medium size yards. Space 10 to 15 ft apart. Wiper seal keeps out sand and grit. Stainless steel retraction spring. 1/2 ft MNPT connection.
|
Orbit Sprinkler Spray Head, 1/2 in Connection, FNPT Connection, Full-Circle/Part-Circle: Full-Circle, Nozzle Type: Full Pattern, Nozzle Trajectory: 45 deg, Pop-Up Height: 2 in, Operating Range: 450 sq-ft, 3.4 gpm, 80 psi, Plastic, Black, Dimensions: 4 in H x 1-1/2 in W x 1-1/2 in D, Includes: Plastic Nozzle
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full circle pattern for slow, deep watering around trees, shrubs, vegetable and flower gardens. Fully adjustable from off to 2 gpm and 0 to 2 ft radius. Removable filter screen.
|
Use to adjust the height of pop-up sprinkler heads from 1 to 6 in.
|
Compression fitting for use with all 1/2 in drip tubing brands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 washers tear off sheet for ease.
|
Spiral barbed tee allows for easy 3-way connection of Rain Bird EZP tubing for sprinkler systems.
|
Compression fitting for use with all 1/2 in drip tubing brands.
|
|
|
