Round duplex receptacle floor box. Duplex cover with lift lids, 2-1/2 in bottom knockout, 18.5 cu-in capacity. Cast iron construction with gray powder coat finish for corrosion resistance. Suitable for carpet, tile or wood floor applications. Mop water tight. If floor covering is used, discard included brass tile flange and replace with Raco 6235 carpet flange. Includes box, brass duplex lift lid cover and brass tile flange. Receptacle not included. UL listed. 4.19 in Dia.

Round non-metallic gray weatherproof cover. Fits T boxes.

For one duplex and one 20 A twist-lock, 1-5/8 in Dia hole. 6.5 cu-in capacity. UL and CSA listed.

Raised gang box device cover used in finish wall applications to mount switches or receptacles. Raised 3/4 in for commercial wall applications. Additional keyholes allow device covers to also fit next smaller box (example: A 4-gang cover will fit a 3 or 4 gang box). 10-11/16 in x 4-1/2 in x 3/4 in.

The Carlon? SuperBlue? hard shell boxes combine the features of the hard shell thermoset box and the thermoplastic PVC style box to create a new rigid non-metallic wiring box. Molded out of specially formulated thermoplastic material, Carlon SuperBlue boxes are so strong they won't crack or break, even in extreme environments. So rigid, they resist flexing and hold their shape even under the worst conditions. They provide the largest wirefill capacity in their class and come with molded-in nailing flanges as well as molded-in clamps to make installation faster. Carlon SuperBlue boxes are lightweight, noncorrosive and nonconductive. They are designed to nest inside one another so they take up less shelf space and are easier to transport to job sites.

Non-metallic sheathed cable clamps. Ceiling box with 14 -1/4 in - 23-1/2 in adjustable bar hanger. Fixture spacing for 2-3/4 in and 3-1/2 in. 4 in Dia x 2-1/4 in D. Ground lug and screw. 6 integral clamps. Listed for fixture support up to 50 lb. UL listed, meets NEMA OS-2.

Hubbell Electrical Box, Cubic Capacity: 60 cu-in, Number of Gangs: 3, Number of Knockouts: 24, Knockout Size: (6) 1/2 in End, (4) 3/4 Inside, Cable Entry: Conduit, Galvanized Steel, Dimensions: 4-1/2 in L x 8-5/8 in W x 1-5/8 in D

Single hole installation. Includes everything needed to install including a hole saw, solid brass cover and single gang grounded receptacle. Low voltage telephone/cable insert plate included. Includes blank plate for custom installation. Polycarbonate construction.

For multiple dead-end circuit terminations or where additional support is required in stub-up applications. Takes standard covers and accessories or devices. 18 cu-in capacity.

Carlon round floor boxes give you the same cost-saving advantages over metal boxes as our rectangular boxes. By letting you combine power, data and communications in the same box, you can dramatically reduce your installation time and cost compared to other non-metallic boxes. In addition, multi-use covers mean fewer SKUs to deal with and greater jobsite flexibility to increase your savings further.

Lightweight, noncorrosive and nonconductive, rigid, non-metallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85 in x 4.17 in. UL listed.

Lightweight, noncorrosive and nonconductive, rigid, non-metallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85 in x 2.41 in. UL listed.

Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability. 4 in Dia x 2-3/4 in width, 25 cu-in volume, two 1/2 in knockouts. Internal steel, stud/wood screws. Fixture rating 50 lb. UL listed for 2 hrs fire resistive walls and ceilings.

Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2 in to 1-3/8 in thick and ceiling substrates from 1/2 in to 1-5/32 in. Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 42 cu-in volume, two 1/2 in knockouts. Internal steel, stud/wood screws. 3-9/16 in D x 4 in W x 3-3/4 in H. UL listed for 2 hrs fire resistive walls.

Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2 in to 1-3/8 in thick and ceiling substrates from 1/2 in to 1-5/32 in. Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 23 cu-in volume, 1/2 in knockout. Internal steel, stud/wood screws. 3-9/16 in D x 2-1/4 in W x 3-3/4 in H. UL listed for 2 hrs fire resistive walls and ceilings.

Non-metallic white ceiling box cover, flat and blank. 4 in Dia. UL listed.

Ceiling box with 14.38 to 22-1/2 in adjustable bar hanger. 4 in Dia x 2-1/4 in D. Fixture spacing for 2-3/4 and 3-1/2 in. Integral clamps. Listed for fixture support up to 50 lb. UL listed.

Conduit wiring system. Gangable switch box offers the option of constructing a box to hold two or more devices. Adjustable plaster ears allow box to be used in old work applications. Provided old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. Two 1/2 in bottom knockouts and two 1/2 in end knockouts. 2-1/2 in deep, 12.5 cu-in. UL listed.

The Carlon? SuperBlue? hard shell boxes combine the features of the hard shell thermoset box and the thermoplastic PVC style box to create a new rigid non-metallic wiring box. Molded out of specially formulated thermoplastic material, Carlon SuperBlue boxes are so strong they won't crack or break, even in extreme environments. So rigid, they resist flexing and hold their shape even under the worst conditions. They provide the largest wirefill capacity in their class and come with molded-in nailing flanges as well as molded-in clamps to make installation faster. Carlon SuperBlue boxes are lightweight, noncorrosive and nonconductive. They are designed to nest inside one another so they take up less shelf space and are easier to transport to job sites.

The Carlon handy box is a non-metallic switch and outlet box specifically designed for use with non-metallic conduit systems and non-metallic sheathed cabling. Unlike metal boxes, the Carlon handy box has two integral cable clamps. These clamps hold non-metallic cable firmly in place without the need for separate clamps, simply push the wire into the clamp opening and the cable is held securely in place. The Carlon handy box also comes with six 1/2 in knockouts on the sides and back for easier wiring and a variety of mounting options.

For dead-end terminations where two devices or additional wiring capacity is required. Safe, non-conductive, will not rust or corrode. Integral mounting feet provide easy mounting. Type 2FSE. 32 cu-in capacity. UL listed.

Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed.

Eccentric knockouts, non-metallic and non-conductive. Can be mounted to wood or steel studs. 3.53 in H x 2.10 in W x 3-1/4 in D.

Thermoset fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 3 in x 4 in x 3-3/4 in. UL listed.

Lightweight design and durable plastic. Safe to install and will never rust or corrode. Includes hardware for easy installation. Rigid wall box.

Thermoset fiberglass with ears, wing brackets, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 2-7/8 in x 5-15/16 in x 3-1/4 in. UL listed.

Ceiling box with nails, speed clamps. 50 lb. fixture rated. 2 hrs wall and ceiling fire rating classification. 4 in Dia x 2-3/8 in D. UL listed.

High impact lightweight round blank PVC cover for 4 in round boxes to make junctions. UL listed.

Suitable for paneling masonry, plaster, sheetrock, tile and all wall coverings. Brilliant electric blue. UL listed.

Suitable for tile, plaster, sheetrock, paneling, masonry and all wall coverings. Brilliant electric blue. UL listed.

Two gang blank rise. Carlon blue color.

With captive nails. 3/0 - 4/0 combination. Fixture spacing for 2-3/4 to 3 in, six integral clamps. 4 in Dia non-metallic ceiling box, 20 cu-in volume. Listed for fixture support up to 50 lb. 4 in Dia x 2-1/4 in D. Meets NEMA OS-2, UL listed and RoHS compliance.

With captive nails and bracket support, twelve integral clamps, six each side. 44 cu-in capacity, 2-11/16 in D x 3-3/4 in x 5-5/8 in. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.

New work safe, non-conductive. With captive nails. Eight integral clamps, four each side. 32 cu-in. Meets NEMA OS-2, UL listed, classified for fire wall assemblies. 3 in D x 4 in x 3-3/4 in.

With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.

With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.

With mounting ears and swing bracket. 4 integral clamps, 2 each end. UL listed, meets NEMA OS-2. Suitable for masonry walls, not UL Classified for Fire Resistance. PVC construction. 20 cu-in capacity. 3-5/8 in D x 2-5/16 in x 4-1/8 in.

Four inch round ceiling box with universal bar hanger, adjustable bar assembly from 16 to 24 in. 4 in Dia x 2-7/16 in D. Speed clamps, 50 lb. fixture rated. 2 hrs wall and ceiling fire rated, UL listed.

Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cu-in capacity.

The Saf-T-Brace allows you to safely install a ceiling fan or light fixture without access to attic space and provides secure attachment to an existing ceiling joist. Ideal for installation during new construction or remodeling, the mounting brace can also be installed in finished ceilings through a hole large enough to fit the box. Each end of the Saf-T-Brace includes four teeth for an extra-strong grip and screws into joists independently for added security and stability. For added ease, the electrical box can be positioned anywhere on the brace to fit your project needs. The heavy-duty, 1-1/2 in, all-metal electrical box, with 15-1/2 in wiring capacity has dual mounting capability for lightweight or heavier fans and fixtures. For fixture support up to 150 lb on 16 in centers and up to 50 lb on 24 in centers. It is acceptable for fan support up to 70 lb.

Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section 314.29.

Safe, non-conductive. With bracket for 3/8 to 5/8 in wallboard. Steel and wood studs, 4 knockouts. 2-15/16 in D x 3-3/4 in x 2-1/4 in.

This Saf-T-Box allows you to safely and securely install a ceiling fan or light fixture during new construction or in locations with attic access. This heavy-duty, 1-1/2 in, all-metal electrical box, with 15.5 cu-in wiring capacity is UL listed to support fans up to 70 lb and light fixtures up to 150 lb. Featuring dual mounting capability, it includes 10 to 24 threads for heavier fans and fixtures and 8 to 32 threads for cover plates and lightweight lighting fixtures. The Saf-T-Box also includes a saf-t-cap to protect bolts and wires during drywall installation and painting.

Made of 16 ga steel. Junction boxes for terminating power or communication conductors. Boxes have flat, removal covers fastened with screws. Mounting holes in the back. Gray enamel finish.

Made of 16 ga steel. Junction boxes for terminating power or communication conductors. Boxes have flat, removal covers fastened with screws. Mounting holes in the back. Gray enamel finish.

Designed and listed for use with non-metallic sheathed cable. With mounting ears. Permissible for use with 90 deg C connectors. 8 cu-in capacity. 1-1/4 in x 2-3/8 in x 3-5/8 in. UL listed.

New work applications, shallow PVC switch box. Integral brackets. 1-1/4 in D x 2-3/8 in x 3-5/8 in. UL listed.

Non-conductive high impact lightweight PVC. Full 20 cu-in capacity. 6 integral clamps. 4 in Dia x 2-1/4 in D. Used for new work or renovations. Rated for fans up to 35 lb and fixture up to 50 lb. Mounts fan to a cross member secured between ceiling joist. Mounting screws included. UL listed.

Shallow ceiling fan outlet box with mounting screws. 1 integral clamp. Non-conductive high impact lightweight PVC. 5 knock outs, 8 cu-in capacity. For new work or renovations. Mounts ceiling fan securely to the ceiling joist. Rated for fans up to 35 lb and fixture up to 50 lb. 4 in Dia x 5/8 in D. UL listed.

Drawn construction for surface mount applications. Conduit wiring system. Nine 1/2 in conduit knockouts (sides). Five 1/2 in conduit knockouts (bottom). TS brackets, for wood or metal studs. Gauging tabs and recessed nailing spur. 4 in square. 2-1/8 in deep, 30.3 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed.

Raco Switch Box, Cable Entry: Conduit, Number of Knockouts: 9, Knockout Size: 1/2, 3/4 in, Number of Gangs: 1, Cubic Capacity: 10.3 cu-in

Raco Box Cover, Square, Number of Gangs: 2, Steel, Gray, 5/8 in L, 4 in W, 4 in H, Slot Mounting, Suitable for: Switch, Receptacle, 2-Gang Box

Raco THE INSIDER Drawn Fan Box, Cable Entry: 1/2 in, Number of Knockouts: 5, Cubic Capacity: 6 cu-in, Round, Steel, 4-1/4 in W, 1/2 in D, 4.38 in H, Ceiling Mounting, Suitable for: Ceiling Fan, Ceiling or Wall Light Fixture, Includes: Mounting Hardware

Four cable knockouts (end). Two 1/2 in knockouts (end). With NMSC, non-metallic sheathed cable clamps. Old work clip. 3 in x 2 in x 2-1/2 in D, 12.5 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed.

Raco Receptacle, Square, Hole Diameter: 2.141 in, Number of Gangs: 1, Steel, Galvanized, Silver, 0.563 in L, 4.69 in W, 4.69 in H, 2-9/64 in Dia, Surface Mounting, Suitable for: 30 to 50 A Receptacles, Includes: Captive Screws, Rounded Corners

Used to mount switch or receptacle on box in surface mount applications. Raised 1/2 in. For one 30 to 60 A, single receptacle 2-5/8 in Dia. 10.3 cu-in. UL listed.

Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 V use in ceilings, floors and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3 in x 2-1/4 in x 1-7/8 in. UL listed.

Safe, non-metallic, non-conductive. Molded instructions. 12 integral clamps, 6 each side. Bracket and captive nails included. 2-1/2 in D x 3-7/10 in x 7-3/5 in.

Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cu-in capacity.

Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cu-in capacity.

Safe, non-conductive. For dead-end terminations. With integral mounting feet. Will not rust or corrode. 18 cu-in capacity. UL listed.

Safe, non-conductive. For dead-end terminations. With integral mounting feet. Will not rust or corrode. 18 cu-in capacity. UL listed.

Round old work box with 4 integral swing clamps. Three zip mount retainers. High-temperature resistant. 4-1/4 in Dia x 2-3/4 in D. UL listed.

Four knock-out type socket openings, 90 deg spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode.

Drawn construction and raised grounding provision for surface mount applications. Four 3/4 in knockouts (sides). Two 3/4 in knockouts (ends). One 3/4 in knockout (bottom). 4 in x 2 in x 1-7/8 in D. 13 cu-in capacity. UL listed.

With mounting ears and 2 swing clamps. Suitable for masonry walls, UL listed, not UL Classified for fire resistance. 2-3/4 in D x 3-1/8 in x 3-15/16 in.

Holding prong, box clip holds box in place for nailing. Design resists bending and twisting. With stud. Length 14-1/4 in thru 22-1/2 in. With locking tabs to hold bar in position. UL listed.

Fits Carlon single gang FS boxes. Paintable surface with textured finish to hide scratches. Stainless steel mounting screws and gasket included. UL, CSA listed.

Raco Drawn Fan Box, Cable Entry: 1/2 in, Number of Knockouts: 5, Cubic Capacity: 6 cu-in, Round, Steel, 4-1/4 in W, 1/2 in D, 4.38 in H, Ceiling Mounting, Suitable for: Ceiling Fan, Ceiling or Wall Light Fixture, Includes: Mounting Hardware

Extra large box. 6 clamps to hold cable, swing out clamps to hold to the wall. Engraved with NEC approved conductor fill. 13 in x 6-1/4 in x 8 in. UL listed.

Four cable knockouts (ends). One 1/2 in conduit knockout (bottom). With clamps for non-metallic sheathed cable. "S" backset. Mounting guides set 3/8 in, with bumps. Angle nail type. 3 in x 2 in x 2-27/32 in deep, 15.8 cu-in capacity. Prepositioned mounting nails included. Acceptable for use in 2 hrs rated walls. UL listed.

Orbit Industries gangable switch boxes with beveled corners are used in the installation of switches and other devices in shallow walls. They are constructed from 16 ga galvanized steel. Non-metallic clamps are installed through the beveled corners for ease of installation. Selected models include brackets for direct installations on stud, leveling bumps or locking grips for old work.

Gangable 3 in x 2 in switch box, offers the option of constructing a box to hold two or more devices. Beveled corners prevent the clamp screws from protruding into the back wall. With non-metallic sheathed cable clamps. Acceptable for use in 2 hrs fire rated walls. Four cable knockouts (end). Two 1/2 in conduit knockouts (end). 1/2 in conduit knockouts (bottom). With leveling bumps. No plaster ears, not suitable for old work. 2-1/4 in D. 10.5 cu-in. UL listed.

Three 1/2 in knockouts (sides). 4 in x 2 in x 1-7/8 in D. 13 cu-in capacity. "A" style bracket for wood or metal, positions handy box securely against face and side of stud. Acceptable for use in 2 hrs rated walls. UL listed.

Orbit Industries round covers are used to cover and protect wires in the box. Orbit Industries offers a variety of designs to accommodate many types of electrical devices. Selected models are raised, with open covers and ears.

Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 7, Knockout Size: 1/2 in, Number of Gangs: 1, Cubic Capacity: 18 cu-in, Dimensions: 7 in H x 2.563 in W x 3.5 in D, Steel, Gray, Bracket Mounting, Suitable for: Switches, Outlet, Includes: TS Side-Mount Bracket with Gauging Tabs, Recessed Nailing Spurs

Add-A-Depth ring or "goof ring" is designed to act as a barrier between combustible wall surfaces and the wiring system. This product can be used for single or two-gang device boxes that are set too deep in the wall.

Carlon Outlet Box, Knockout Cable Entry, 2 Gangs, Square Shape, 32 cu-in, Dimensions: 4 in L x 4 in W, Thermoplastic, Blue, 90 deg C, Captive Nail Mounting

Two 1/2 in conduit knockouts (end). Old work clips. Provided U box support eliminates the need for additional box supports to secure box in wall opening. For 3/4 in sheetrock maximum thickness. Acceptable for use in 2 hrs fire rated walls. 12.5 cu-in capacity. Measures 3 in x 2 in x 2-1/2 in. UL listed.

Raco Box Cover, Square, Number of Gangs: 1, Steel, Gray, 0.063 in L, 4 in W, 4 in H, Slot Mounting, Suitable for: Switch, Receptacle

Raco Box Cover, Square, Number of Gangs: 2, Steel, Gray, 0.063 in L, 4.063 in W, 4.063 in H, Slot Mounting, Suitable for: Switch, Receptacle

Raco Box Cover, Square, Number of Gangs: 2, Steel, Gray, 3/4 in L, 4 in W, 4 in H, Slot Mounting, Suitable for: Switch, Receptacle

Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 V use in ceilings, floors and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3 in x 2-1/4 in x 3 in. UL listed.

For dead-end terminations where two devices or additional wiring capacity is required. Integral mounting feet. 32 cu-in capacity. Type 2FSE UL listed.

For use with non-metallic wiring systems. Non-conductive, noncorrosive and impact-resistant for a safe, long, service-free life in exposed applications. Install in accordance with NEC and local codes. Three 1/2 in plus four 3/4 in threaded ports. UL listed.

Carlon Plaster Ring, Round Shape, 1 Gangs, PVC, Blue, 1/2 in Length, 4 in Width, 4 in Height, 4 in Diameter, Screw-On Mounting, Suitable for: Non-Metallic Box, Octagonal Ceiling Boxes

Four 1/2 in conduit knockouts (sides). Four cable knockouts (end). Two 1/2 in conduit knockouts (end). One 1/2 in conduit knockout (bottom). With non-metallic sheathed cable clamps. 3 in x 2 in x 2-3/4 in D. 14 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed.

Steel box cover with single 1.406 in receptacle opening in the center. Rugged construction. 2-5/16 in W x 4-3/16 in T. UL listed.

Old work PVC box. With swing clips and integral clamps to hold securely. 3-5/32 in D. 25 cu-in capacity.

Plaster ears, old work swing style clips secure box in wall. Integral clamps. Two hour fire rated. Mounting clips. 3 in D. 14 cu-in capacity. UL listed.

Conduit wiring system. Two 1/2 in and twelve TKO conduit knockouts (sides). One 1/2 in, three TKO conduit knockouts (bottom). No bracket, installed in ceilings or walls for lighting fixtures or receptacles. 4-11/16 in square x 2-1/8 in deep, 42 cu-in. Combination cover screw heads provide for faster mud ring/cover installation. UPC bar code. UL listed.

Thermoset fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 3 in x 5-11/16 in x 3-3/4 in. UL listed.

With captive nails. 18 cu-in volume. Listed for fixture support up to 50 lb. 3 in Dia x 2-3/4 in D. Meets NEMA OS-2, UL listed.

UV resistant, suitable for outdoor use. For use in wet or damp locations, UL Marine Listed. Non-metallic, non-corrosive, will not rust or fade. Fits two gang metallic and non metallic boxes. Includes stainless steel mounting screws and gasket. UL Listed.

Patented design provides simple, goof-proof installation and allows the installer to adjust the box to any thickness with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2 in. 3 in D x 5-5/8 in x 3-5/8 in. Satisfies NEC 370-20. UL listed 5Z74 and classified 2 hr W/C.

With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies.

Provides simple installation and allows adjustment from 0 to 1-3/4 in with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2 in. 3-3/8 in D x 3-7/8 in x 3-3/4 in. Permissible for use with 90 deg C connectors. Satisfies NEC 370-20. UL listed 5Z74 and classified 2 Hr W/C.

For telecommunications and other low voltage wiring. Suitable for old work applications. 1.18 in D x 2.18 in x 3.05 in.

Non-metallic. Non-conductive. Suitable for masonry walls. 4 in x 4 in x 1-1/2 in. 1/2 in and 3/4 in knockouts. UL listed.

Ceiling fan box, 4 in octagon, 1 bottom 1/2 in TKO knockout. 2-1/8 in depth, 22.3 cu-in. Used in new work and renovations. Features FA bracket for wood studs or joists, which allows box to be securely mounted flush. Ceiling fan rated, can be used in the installation of heavy light fixtures or ceiling fans. Recommended support load for ceiling fan is 70 lb, for fixtures is 150 lb. Includes non-metallic sheathed cable connector, mounting hardware, high-strength hardened screws and instructions. Acceptable for use in 2 hrs rated walls and ceilings. UL listed.