For making a 90 deg outside turn around a corner.

CornerMate Cord organizers are perfect for concealing audio or home theater cords in corners. Peel-and-press installation is quick and easy. Cover reverses for your choice of concave or convex profile. Paint CornerMate to match your walls. Designed to work with CableMate and CordMate II systems for complete cable management.

For installation requiring 3-way branching including 90-deg angle.

Our flat screen TV cord cover kit makes it a snap-to hide wires. It's very easy to install and can be painted to blend seamlessly into any wall. To add a component, snap-off the cover, add the cables and snap the cover back on. Organize and hide cords and cables easily. It's the perfect thing to happen to TV since the remote. 30 in Cord cover features pre-drilled holes to simplify mounting and includes wall screws and anchors.

For most residential wiring devices. For installing a shallow switch or outlet. 1 in D.

For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1 in deep.

Fits over existing single gang outlet to feed power as the starting point for your system. 1 in D.

Carries wire from starter box to downstream outlet boxes, switches and fixtures. 5 ft L x 1-5/16 in W x 7/16 in H.

For making 90 deg right or left turns on a flat surface.

For bringing power to a light fixture, ceiling fan, smoke detector or other round based fixtures.

Expanded capacity for extra outlets or outlet/switch combinations. 1-3/8 in D.

For making a 90 deg turn around an outside corner while changing channel orientation.

Mounting components for NM1 wire channel, including screws and anchors, wire clips and joint cover.

For installing dimmer switches as well as standard size switches and outlets. 1-7/16 in L x 1-3/8 in D.

For installing a deep-dimensioned box for dimmers, speed control switches and other devices. 1-3/8 in D.

For transitioning from non-metallic raceway to conduit. Hides and organizes loose cords and wires.

Hides and organizes loose cords and wire.

Hides and organizes loose cords and wire.

Use to provide easy access to connections.

Used to make a 90 deg outside turn around a corner.

Used to make a 90 deg inside turn around a corner, from wall-to-wall or wall-to-ceiling.

Used to make a 90 deg right or left turn on a flat surface.

Metal surface mount, for wall or ceiling use. 5 ft L x 3/4 in H x 17/32 in W. Use to protect cords.

Hides and organizes loose cords and wire.

Hides and organizes loose cords and wire.

Hides and organizes loose cords and wire.

Hides and organizes loose cords and wire.

Kit includes three 3 ft sections of channel, two couplings, one inside elbow, one outside elbow and two flat elbows.

Especially suited for covering home entertainment wires, speaker cables, TV/video cabling and home office wiring. Self-adhesive backing makes for easy installation. Stylish design complements any interior setting. Paintable.

For making a 90 deg inside turn around a corner from wall-to-wall or wall-to-ceiling.

Expanded capacity for extra outlets or outlet/switch combinations. 4-3/4 in x 4-7/8 x 1-3/8 in D.

Carries wire from starter box to downstream outlet boxes, switches and fixtures. 5 ft L x 1-5/16 in W x 7/16 in H.

For branching wire channel in two directions at 90 deg angles.

For oversized wiring devices such as fan speed controls, dimmer switches and GFCIs. 1-3/4 in D.

CornerMate cord organizers are ideal for concealing audio or home theater cords in corners. Peel and press installation is quick and easy. Cover reverses for your choice of concave or convex profile. Paint CornerMate to match your walls. Designed to work with CableMate? and CordMate? II systems for complete cable management.

For making a 90 deg turn around an outside corner.

For making a 90 deg turn around an inside corner from wall-to-wall or wall-to-ceiling.

For covering home entertainment wires, speaker cables, tv/video cabling and home office wiring. Self-adhesive backing, paintable. Contains 4 pieces of raceway, each 30 in long, two flat elbows, one inside elbow, one outside elbow, three couplings, one t-fitting.

For connecting raceway to conduit boxes with 1/2 in knockout.

For transitioning from non-metallic raceway to conduit. Hides and organizes loose cords and wires.

For branching wire channel in two directions at 90 deg angles.

Mounting components for NM1 wire channel, including screws and anchors, wire clips and joint cover.

For making 90 deg right or left turns on a flat surface.

For bringing power to a light fixture, ceiling fan, smoke detector or other round based fixtures. (Not a mounting bracket. Ceiling fans and fixtures over 10 lb must be mounted independently from circular fixture box.

For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1-3/4 in D.

For installing dimmer switches as well as standard size switches and outlets. 1-7/16 in L x 1-3/8 in D.

Fits over existing single gang outlet to feed power as the starting point for your system. 1 in D.

For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1-3/4 in D.

For mounting phone, fax, cable and audio connections (not for power).

For bringing power to a light fixture, ceiling fan, smoke detector or other round based fixtures.

Metal raceway. For transitioning from metal raceway to 1/2 in conduit or from any steel box with 1/2 in knockout.

One each 12 ft of cord channel (3 sections, 4 ft L), inside elbow, outside elbow, T-fitting, 2 each flat elbows and couplings included.

CordMate cord channel is streamlined to blend with any decor. Great for concealing phone wires, lamp and extension cords. Ideal for family rooms or bedrooms. Self-adhesive backing makes it simple to install on a baseboard or wall. Paintable.

Our new Flat screen TV cord cover kit makes it a snap-to hide wires. It's very easy to install and can be painted to blend seamlessly into any wall. Need to add a component - no problem. Snap-off the cover, add the cables and snap the cover back on. Organize and hide cords and cables easily. It's the perfect thing to happen to TV since the remote. The 48 in cord cover comes with wall screws and anchors.

For making a 90 deg inside turn around a corner from wall-to-wall or wall-to-ceiling.